kvm driver

Ask any question about hosting in general or not :)
Post Reply
jcaleb
Posts: 92
Joined: Fri Aug 03, 2012 8:56 am

kvm driver

Post by jcaleb » Wed Aug 15, 2012 12:17 pm

hello admin/uncle,

which network and disk driver are best to choose for each case of linux or freebsd?

thanks

Admin
Site Admin
Posts: 490
Joined: Wed Jul 25, 2012 10:54 pm

Re: kvm driver

Post by Admin » Wed Aug 15, 2012 12:37 pm

I suspect KVM since bsd doesnt really run on others.
In case of KVM VirtIO is a must, unless you have tons of cpu, because using ide and even scsi will put a large strain on the cpu.
Freebsd will probably have virtio support, linux has already.
If you dont have big transfer on network, any will do, but also virtio is recommended.
This is the XEN-PV approach, they modified kernel of guest to push io to the host kernel, Rehat is doing something similar, tho not so high in the kernel space.
I must admit Redhat did a better design here, however, Xen-PV is still faster and will always be.
M

jcaleb
Posts: 92
Joined: Fri Aug 03, 2012 8:56 am

Re: kvm driver

Post by jcaleb » Wed Aug 15, 2012 1:29 pm

Thanks admin.

Sorry I forgot to mention I was only referring to KVM. So regardless if I use linux or BSD, I should always use virt driver for both network and disk drivers right? Thanks!

Admin
Site Admin
Posts: 490
Joined: Wed Jul 25, 2012 10:54 pm

Re: kvm driver

Post by Admin » Wed Aug 15, 2012 2:28 pm

I imagined you mean KVM since bsd doesnt run on something else (except xen HVM).
You can do without, but performance will suffer.
The more iops and network traffic you will have, the more cpu will you lose.
KVM can only compete in speed somewhat with other techniques due to the VirtIO drivers.
Admin

jcaleb
Posts: 92
Joined: Fri Aug 03, 2012 8:56 am

Re: kvm driver

Post by jcaleb » Wed Aug 15, 2012 5:54 pm

Thanks. Admin, you are M? I thought you were John

jcaleb
Posts: 92
Joined: Fri Aug 03, 2012 8:56 am

Re: kvm driver

Post by jcaleb » Wed Aug 22, 2012 8:18 pm

Hello,

One of my KVM is using Intel Pro /1000 Network card. Do I need to set it to virtio and reinstall? Or would this just run fine?

Thanks

Admin
Site Admin
Posts: 490
Joined: Wed Jul 25, 2012 10:54 pm

Re: kvm driver

Post by Admin » Thu Aug 23, 2012 2:59 pm

In general, VirtIO is preferred. If you have big traffic of small packets, your CPU will breathe easier, if you are OK with CPU performance and reinstalling will be a big hassle, it is not really necessary, just a recommendation.
One question though, why do you need to reinstall ? Just changing the emulation should make the OS autodetect it and work like that in most recent linux cases.
Which OS are you using ?
Admin

jcaleb
Posts: 92
Joined: Fri Aug 03, 2012 8:56 am

Re: kvm driver

Post by jcaleb » Fri Aug 24, 2012 6:47 am

Thanks for the explanation. I am using Debian 6. I didn't know it would work without reinstalling.

Admin
Site Admin
Posts: 490
Joined: Wed Jul 25, 2012 10:54 pm

Re: kvm driver

Post by Admin » Fri Aug 24, 2012 11:43 am

You can switch back if it doesn't work. But I doubt, it shoud :)

Admin

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests