iwStack: Complex setups with isolated networks and IPSec

Links to great tutorials and original contributions.
Don't know how to setup your VPN ? How to install a panel ? How to tweak yout VPS ? Check here and ask if you don't find what you are looking for.
Post Reply
Admin
Site Admin
Posts: 490
Joined: Wed Jul 25, 2012 10:54 pm

iwStack: Complex setups with isolated networks and IPSec

Post by Admin » Mon Sep 02, 2013 3:12 am

Hello !

You know the basics already, now we will go for a more complex problem.
We all know about the dangers of hacking and how critical it is to secure our applications, especially those facing the internet.
What is the best way to make sure we have a robust infrastructure as well as a very secure one ?
Say, we need to have a heavy load web server on port 443 (secure HTTP or HTTPS) and a mail server. Normally, in the VPS business, we have all the components running on a VPS, the web server as such, the database, PHP, the mail server. We can, of course, have more servers, one with the database, one with the web server and PHP, one with the mail and even one reverse proxy which is reading the web server and caching queries and serving the visitors.
But, there are some problems with this. First, all traffic between these servers will be counted, second, all ports will have to be exposed to the internet, even if we run some iptables rules to allow access only from one IP or the other. There is also the problem of load balancing and increasing capacity fast if needed.
In a real IaaS, it is simple to bypass all these potential problems.
First, we will create an isolated network, something similar with our corporate or home LAN, it will be completely isolated from the internet, we will then allow access only to the ports/IPs we need and we will setup IPsec tunnels to connect with our laptop or even corporate LAN and make the isolated network part of our LAN.
Say we need the following:
1 Database server, 2 Web servers with load balancing, 1 reverse proxy server to cache the requests. They will be arranged like in the diagram:
All that will be open will be port 443 for HTTPS and the only server that will have that port reachable, will be the proxy server, all the others will be inaccessible from the internet.
So, we proceed to create the zone by creating the fist vm, say the database server:
Image
Click add instance. Proceed as in previous tutorials to create an instance with an important exception:
Image
Make sure you do not have any of the shared networks ticked. Then check the box below at Add network and name it. This will create the default isolated network and will also create the automated virtual router VM.
You may wish to add a second disk (DATA DISK) to your server, where you will save the database to keep it separate from the operating system so it is easier to take snapshots and upgrade OS (if you keep all data there, including the logs and access settings among other things) in step 4.
We have now the first VM on the isolated network. However it is really isolated by default, can't even access the internet, we need to allow it to get updates. If you really wish to have it access only the mirror for updates, you can limit it's access to a mirror or two only and one external server if you wish to dump the database there from time to time. But I will allow access to all internet while leaving internet access to the VM completely off as it will host the database and has no business exposing that to the internet.
Go to Network, hover your mouse over the plus near your newly created isolated network and go to View IP addresses arrow:
Image
Note your IP address, this will be your external IP, however, your VM has another ip address (you can see it with ipconfig). Remember you will allow internet access based on vm name, not internal IP address as you would do on your local network at home or your corporate LAN. Let's allow this VM to access the internet (you can replace 0.0.0.0/0 network mask with something else if you wish to allow only certain IPs, of course, I will allow the VM to access the whole internet), but first, let's enable VPN access:
Image
You should also create an user and password in the VPN tab. They will be used to connect to the VPN.
Now, lets allow access to the internet. Click the IP address in the previous screen and you get this in the configuration tab:
Image
Click on the View all arrow in the firewall section:
Image
If you are inserting the numbers as in the picture and then do Add, a new rule which allows access to any TCP port on the whole internet will be added. We have no reason to add UDP access, so we wont, but the procedure is similar. Notice there are already some rules there, since we added the VPN access.
For more information about the firewall, please look at the respective tutorial.
Now we can go and update the VM, install the database server, then add the 2 webservers too and the proxy one. They can all access the internet, the settings apply for all current and future VMs in this particular network.

Admin
Site Admin
Posts: 490
Joined: Wed Jul 25, 2012 10:54 pm

iwStack: connecting to the IPSec VPN using a windows 7 clien

Post by Admin » Mon Sep 02, 2013 5:06 am

Let's connect to the network now. First, will do this using a windows client located behind another router, say, at home (will use my computer for this, with window 7).
Go to your Network and sharing center by right-clicking you internet connection near the clock display in the lower right corner:
Image
Click setup a new connection or network, Connect to a workplace, Use my Internet connection (VPN), then insert the external IP you got for your isolated network's router, in my case: 194.68.42.179.
Image
Name it iwStack or anything you like below and select Don't connect now, just set up the connection so I can connect later. Username and passwords are those you created when you setup the VPN.
Image
Now select the connection and click properties:
Image
Select IPsec as in the picture and at then click advanced button to insert the passphrase for the connection.
Image
You are set now, click connect and insert the username and password you created in iwstack interface.
Image
It is important to select the home network or disable firewall completely if you wish to have a trouble-free experience.
Please note that in this way you are connected to the iwstack isolated network, you will lose connection to the internet. In order to restore it, you will have to manipulate gateway metrics in windows or setup a NAT gateway in the cloud, but this is beyond the scope of this tutorial.
Now your windows 7 machine is part of the iwstack isolated network, will act like being in the same lan, therefore you can access the VMs there unrestricted with their internal IPs as your machine is bridged with the iwstack lan, for example:
Image
Note the IP in the putty title bar and the one revealed by the ifconfig command. You are effectively within the iwstack with your PC. Even if you completely block internet access (except the VPN) you will still be able to join the isolated lan or join the whole LAN to your own local one, whether it is a home or corporate one. If you wish to join the whole lan, you need to setup your local router to connect and it will create a tunnel and a bridge between your local and iwstack lans.
Here is the documentation on how to do it with pfsense: http://doc.pfsense.org/index.php/VPN_Capability_IPsec. Many cheap routers can do it too, just check your documentation.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest